...inner door panel now look up inside the door and you should see a small rod which is held onto the door handle with a plastic fastener, pry the plastic fastener from the rod, it just clips onto the ...
inner door panel and reconnect the rods to the handle from inside the door. if the clips that hold the rod onto the handle are broken, you may need to source new clips, or just get another door handle
...inner door panel you will see a rod that connects to inner door handle and the actual door latch mechanism if it has become detached it will most probably that the either nylon or metal clip that ...
...inner door handle bezel-1 philips screw. Then remove 2 large screws under inner door handle. The lower light lens can then be removed exposing 2 small philips screws. Remove those and take out light ...
...inner door panel, there will be screws along the door handle puller, and inside the little door cup, also on the inner door handle there's one, if you have mechanical windows there's a clip ...
...possible and reach in and pull the rod to release door then replace handle if broken .I have also seen the rod clip break and the rod fall off still have to remove inner door panel to access.GOOD ...
...inner door panel, either the handle itself broke where the rod connects,or the rod fell off or broke at the door latch, or the door latch lever bent or corrodded, the outer and inner handles use the ...
Question about Pontiac Grand Prix
inner door panel. If equipped, remove screw attaching door pull cup to inner door panel. If equipped, remove screws attaching trim panel to door from below map pocket. If equipped, remove window crank
...inner door lock rod. Pulling or pushing the rod should allow you to open the door and remove the trim completely. If there is no obvious damage to the outer door lock, check where the outer door ...
13 questions posted
Usually answered in minutes!
1,496 Questions
1,236 Questions
1,211 Questions
1,043 Questions
1,014 Questions