...harmonic balancer on my 1997 jeep grand Cherokee. Will you please send me replacement instructions? Also, I would appreciate any helpful tips and a list of required tools. Thank you. first you will ...
Question about Jeep Cars & Trucks
...jeep Cherokee how do I tighten There is one bolt in center of pulley/harmonic balancer. Sounds like the harmonic balancer has started going bad..if bolt in center of pulley is loose...which is fairly ...
Question about Pontiac Fiero
what size is the bolt in the harmonic balancer in a 1993 jeep grand Cherokee larado 5.2 liter bolt size i posted this yesterday 1-1/4" or 32mm buy and use a caliper to measure bolts.
how does the harmonic balance pully fit on a 1996 jeep cherokee is it bolted or pressed on as the pully is forward of the motor by 3/4 of the thickness They are bolted on at a high torque.
...harmonic balancer check the bolts that attach the pulley to the balancer to see if they are tight. Sometimes they can work their way loose. If it were a main bearing the engine would have a slight ...
Question about Pontiac Fiero
how to change the harmonic balancer pulley on a 99 jeep grand cheroke v6 4.0L -Lose all belts and unbolt then slide it out. You need an impact gun to lose the bolt. Mai Lor
Question about Pontiac Fiero
harmonic balancer, it's not hard to remove (in most cases). Find the sensor and disconnect it (it should either be threaded into the engine itself or mounted to the exterior of the engine depending on
...harmonic balacer off my motor with out taking it a part? You will need to remove anything interfering with a balancer removal tool. You will need to remove the drive belt and belt pulley from the ...
Harmonic balancer seems to be out of alighnment with other pulleys ,Keeps throwing off the belt HELP check the balancer to see if outer ring has started to walk off the center hub...(common on these) ...
206 questions posted
Usually answered in minutes!
91 Questions
85 Questions
62 Questions
65 Questions