1979 Pontiac Firebird "not turn" Questions

not start. when i turn the key, the engine sounds like there is not enough power to turn the motor. i tried to jump the battery, but the same thing happened, there seems to not be enough power to turn

...turn signal not working. right turn signal causes both to falsh Engine 350ci, turbo 350 automatic I'm having an electrical issue with my my turn signals. Hopefully someone can help. I checked the ...

...turn sinal switch its not hard remove center of steering wheel (horn button) remove steering wheel bolt with steering wheel puller pull wheel off remove turn signal handle three screws and emergency ...

...turn signal not blinking. Maybe it's a flasher or the light bulbs aren't getting current through the wiring. I can't help you out with the interior gauge lights not turning on when you turn the ...

...turn signal does not work at all. Can u help me please turn it on,, get out of the car & see if all the turn lights are working,,if u dont know how many,,turn right on first look at them,,then ...

...not turn over and as of the result the starter will labour and fail as it have to work very hard to turn the motor over. take out all the plugs and try to turn the motor over with a spanner on the ...

...turn signals does not work, the emergency flashers works though. I also noticed that the high beams does not work either. When turning this on, all the head lights go off. I am guessing that the low ...

...turn signal works sometimes, sometimes not. Mostly not. My right one is just fine. I checked the fuse was fine.Can someone let me know what it is please? Thanks. sounds like it needs a turn signal ...

...turn signal is not functioning properly. It will come on but it does not blink. The passenger side works fine. Any suggestions? A safety (warning) feature on many cars is that the turn signal light ...

turn signal lever or switch is breaking often, then the work is not being done right. they are hard to do correctly. but most likely the turn signal switch or the wiper switch is binding. replace both