...behind the tranny crossmember support somewhat hidden by a metal cover. Easy to see if you just look near the middle of the truck - under the where a back seat would be if you have the 4-door
...tranny crossmember my car has a broken crossmember the car dont shift right it slips in high gear could this be the linkage or the transmission With that Crossmember Broken It is putting a Strain on ...
...tranny was used in 88-90 the transmission crossmember sets straight across and bolts on to the frame on each side with one bolt.. with some major fabricating it is possible but to simply change out ...
...tranny while sliding the crossmember out. This can easily be accomplished by placing a small floorjack centered under the tranny pan with a 1 foot by 1 foot square piece of plywood on the jack lift ...
Question about Nissan Frontier
...tranny mount on the exsisting crossmember. I have an 81 buick that now has a455 olds with a th400 in it, I asol have an 80 cutlass with a 403 and th350 from a 78 pont wagon in it the trick is to use ...
...gearbox out together in one hit with crossmember ?? best way, remove tranny, then front cross member and then drop the engine out the bottom. having the tranny on it makes it very difficult to ...
...tranny and loosen hte nuts on tha crossmember. slide the trany back far enough to get to the flywheel bolts, or remove tranny. take out the bolts holding the flywheeland remove old clutch. go to the ...
...(3) Remove the nuts holding the support cushion to the crossmember (4) remove the crossmember (sometimes you dont have to completely remove it but its easier if you do) 5. Remove the tranny ...
...tranny I have a 1993 dodge dakota v8 2wd transmission available to me to replace my 1994 dodge dakota v8 4wd transmission that doesnt have reverse or 3rd gear anymore with and was told to do that I ...
Question about Nissan Frontier
...crossmember and slowly let it down. The tranny will drop more than enough to see if you need to replace any lines or fittings, as well as give you room to do that. 4wd is a little more work, but take ...
224 questions posted
Usually answered in minutes!
482 Questions
408 Questions
305 Questions
268 Questions
263 Questions