2001 Nissan Pathfinder "windscreen wiper arm" Questions

...wiper arm if only one arm is not working. You will have to get to where the motor shaft comes through the top of the firewall just below the windscreen and check the crank and the drive rods from ...

...windscreen wiper motor working but the windscreen wipers are not moving Wiper arm is loose at pivot. Take caps off at pivot and run motor to rest position. Move wiper arms to rest position and secure ...

...windscreen then banging down on hood on return car is hyundai accent coupe p reg just turn of the wiper switch turn off the key 30 sec later, move the wiper arm to the park position, then remove the ...

...wiper works and the front windscreen wash system also works Remove cover from rear wiper arm (it is covering the wiper arm nut) gently ease off the plastic moulding in the middle of the nut try ...

...wiper arm off the windscreen as you would do if you were washing the windscreen. tilt the blade assembly so that they are at right angle to the wiper arm and now push the wiper blade down towards the ...

SIDE WIPER BLADE GETS CAUGHT UNDER PLASTIC BIT ON SIDE OF WINDSCREEN remove the wiper arm and reposition it a bit further up on the windscreen. Make sure that the rubber is not much past the blade arm

...windscreen wiper stopped working on my mx-5. It's not moving at all. The wiper arm could have come loose from the driving shaft. Lift it off the screen and see if it mooves backwards and forwards ...

...wiper arm on in a possition close to the bottom of the windscreen and lightly tighten the nuts back up... Test to be sure they are where you want them... being sure they are not resting on the ...

...wiper arm across the windscreen. If faulty it will move on it's own. If not BOTH wiper arms should try to move. Remove, clean and refit the arm to see if that helps. It might take some effort to ...

...windscreen !!! How to change a wiper motor & repair wiper mechanism on Audi A4 First time you must diagnose why windscreen wipers going slow and/or stopping. In order to find out the cause of ...