2006 Ford F-250 Super Duty "relay fuel pump melted" Questions

...fuel pumps stay on. they wont go off untill i unplug the battery. it always starts. cant find anyone else with same problem. i had a 91 150 ithe a 300 six and it did the same thing. any suggestions. ...

...Relay, check with Autozone or Oreillys or similar for parts listing. The Glowplugs start a cold engine. In a warm engine, the Timer will not engage at a certain temperature. Engine compression will ...

relay in the dash board ic clicking and truck wont start its a 1999 f250 super duty diesel. it turns over but wont start. i just installed new fuel pump its working fine It sounds like the "Timer" for

...fuel pump ive changed the fiters is there another sensor that could be bad or a fuse to check. It ran fine drove it home one night got up next day it would try to start but just never would fire up? ...

fuel pumps changed the relay nothing either makes her fire over tach jumps when key is in on position the battery started draining first but it ran no drain anymore but it wont start inertia switch is

...fuel pump relay What would cause my fuel pump relay to melt? The fuel pump is reading at 61 PSI. sounds like there is a short in the system some where or it could be just a faulty relay just change ...

fuel pump relay switch (located under the hood, driver's side wheel well) keeps shorting out and melting fuse panel 96 chevy truck, fuel pump relay switch (located under the hood, driver's

...Fuel pump relay meltdown 6.0L Hi, I was helping neighbor with his 2005 chevy express 3500 cargo van relay. He noted it buzzed occasionally when vehicle off and just sitting. He had rapped on fuse box ...

...fuel pump was at 61. If a relay melts you stop using the truck before youburn out something elseI don't think AAMCO is the best place to go for thatObviously you have too much current going ...

...fuel relay was toasted just melted so we replaced that once we hooked everything back up the car started but it will not stay running for less then a min do we need to reset the pump again? any other ...