...chain. any one know specs There are no marks on this one. There is a special tool set to align camshafts ($900). The best you can do is to bring #1 cyl to TDC compression with both cam(valve) ...
time it is to ensure both the off centre cam shaft slits are level/flat with the head. With the engine at TDC both the cams need to have the off centre slot in the same position either up and level or
main crank to balance shaft timing guide it snapt ive replaced it but i need to set the cam timing but there's no marks to show if the timing is correct.can you help thanks timming markes are on the ...
1997 ford explorer 4.0 sohc how to set timing where are the timing marks at on the camshafts and chain to set timing There are no timing marks. Timing is done using special tools to hold the crank at ...
...Cam Belt side) Remove the timing belt and time the engine to specifications, make sure you are on #1TDC, remove the tensioner and replace. if there is and Idler pulley replace that as well. You can ...
Question about Ford Explorer
Need to know the way the cams are faced to set timing on 2002 ford explorer 4.0 motor Line up the marks on the cam cogs with the pointer on the cover the front pulley mark on top dead centre.
...or know where i can find it? There are three engines used in a 97 model. The 4.0 single overhead cam V6 engine uses a timing chain in the front and in the rear, one for each cam. The left side is ...
...time are we talking? He told me that someone told you have to pull the engine? Yes? No? What engine do you have? if it is a 4.0 V6 then there is a recall for new cam chain tensioners to address the ...
very bad rattle noise in top of a 4.0 overhead cam .gas engine but sounds like a diesel ! Sounds like a bad timing chain probably in the passenger side rear of the head. If it the one in the front on ...
...cam phasers" , there are cheater tools which save considerable time and money to switch using shortcuts. You also may have a bad fuel pump relay if you find the Inertia switch is not the problem and ...
2,160 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions
