...2: pealn away if possible or (ugly part) make a circumferential cut around the soft button material as close as you can to the sealing groove that the cover was in. Step 3: remove buttons, support ...
Question about Cars & Trucks
...big lug is battery input, 12.6vdc reseted tiny pin Purple is what I call the KEY line turn key and goes hot.12v. so i see the other post 88 section 10 688 pages deep, a monster book 2.2L engine, or ...
...big enough to allow me to get a 10 ring spanner in and enough room ie cut more away if needed to undo the 2 bolts holding the lock in place, this way is easier and quicker by miles. i did the same on ...
...big job to do so, although you will need new gaskets. See p14 here http://www.turboninjas.com/camry/eg2.pdfYou can change the plugs without this by taking the bolt out of the centre rear lower engine ...
Question about Cars & Trucks
...big to hold the screws that hold the doors on. Have tried rawlplugs of various sizes. I have tried rawl plugs of various sizes. Is there some way of filling the holes and redrilling them? Get tube of ...
2,160 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions