...brake pedal. How do I know if I need a new clutch? A clutch pedal takes MUCH more travel to function correctly, when compared to a brake system... A clutch needs to be replaced (maybe) when it SLIPS, ...
...brake pedal and handbrake lever and wonder whether some adjustment can be made to reduce this travel on brake pedal your rear brakes are worn or the self adjusters are rusted, assuming you have drum ...
adjust the brake light switch correctly? To adjust the brake light switch, first press the brake pedal down a few inches, then pull the switch plunger rod out of the switch toward the brake pedal arm,
...pedal. have the brake system checked for leaks ( externally as well as internally eg master cylinder) and wear. If a-ok then have them bleed the system. Now if your saying there is a problem with ...
...adjust my brake pedal on my mitsubishi L200, their is too much travel on the pedal at the moment Hi If you pull the hand brake on a little, and the pedal improves, the problem is in the rear brakes, ...
...adjust the rear brakes and the brake pedal will be nice and hard with 3 clicks on the handbrake ,nice job when done and it all works ,their is no adjustment on the brake pedal only on old cars with ...
...brake pedal.. follow the rod behind it up under the dash..and you will see a pressure switch there..it can be adjusted for travel but you can also add a return spring on the pedal shaft to pull the ...
...on the brake ,notice how far the pedal travels,then apply the e brake.Step on the brakes again,if the pedal is firmer,the rear brakes need adjusted.If there is no difference the cable needs ...
...go up enough to touch the brake light sensor There is an adjusting rod behind the master cylinder or at the brake pedal. The dealer should adjust this for you as its travel distance is very
2,160 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions