...crankshaft pulley on my 1999 ford taurus the crankshaft pulley is also called the harmonic balancer.At any parts house checker,autozone,ect. will have the tool you need.It is called a harmonic ...
crankshaft pulley on 98 ford taurus....while engine is still in car.when pulling off the pulley it hits the inner wall of the car..therefore not having enough room to slide off the shaft You will have
...Crankshaft pulley. Here's how to get a serpentine belt on or off (You'll need to do both). It's easy and doesn't require a prybar. On: Get a 14mm or 9/16" socket and a long handled ratchet or breaker ...
Question about Ford Taurus
look by the crank, you will see the sensor with a wire connector. disconnect the wires and unbolt the one bolt that holds it onto the engine. pull out and replace. you have to remove crankshaft pulley
...pulley for last the job goes smoother. put the belt on the crankshaft first. then go around in either direction. remember the smooth serrated rule and rout the belt. most likely the alternator will ...
Question about Ford Taurus
...crankshaft pulley. It has left-handed threads. Pull out the oil pan and the oil pump screen and tube. Take off the front cover and the timing chains and remove the crankshaft timing gears. Finally, ...
...crankshaft turns but won't turn the serpentine belt after radiator fluid got on it! Remove and Replace the Serpentine Belt. Click on the following free direct Link. It has the Serpentine Belt Diagram ...
...pull on it or you feel binding or seizing you have a major mechanical issue good luck While it may sound like something everyone should know, make sure the ignition is off when you try moving the ...
...a puller to safely pull, without damaging, the pulley off the crankshaft. When it gets pulled away, off the crankshaft, remove the puller, unbolt the center bolt all the way and take the pulley
Question about Ford Taurus
...Pull the electrical connection off the crankshaft sensor. Remove the two bolts that secure the crankshaft sensor against the engine with an open-end wrench, then slide the sensor out of the engine. ...
3,186 questions posted
Usually answered in minutes!
2,348 Questions
2,262 Questions
1,869 Questions
1,431 Questions
1,365 Questions