2000 Ford Taurus "pcm light flashes receiver" Questions

...PCM a matched pair, so neither will operate in another vehicle. When system is functioning properly and ignition switch is turned to RUN or START position, THEFT indicator light will turn on for 3 ...

...light on the dash? Principles of Operation The PATS uses a specially encoded ignition key, this key is not compatible with previous vehicles or any current model year vehicles. Each specially encoded ...

...light for three seconds when key is turned to on. here's some info. Principles of Operation The passive anti-theft system (PATS) uses a specially encoded ignition key. Each encoded ignition key ...

...flashes. Still won't start. Lights, air,strreo etc all work. Tried to pop the clutch, no luck. Key does not operate driver sided lock. So can't reset system there. Tried resetting the key 8 turns to ...

...light continuously. • The PCM will become fail-enabled for future ignition cycles. If a failure occurs in serial data before the ignition cycle, while the PCM is not fail-enabled, the PCM will never ...

...light is flashing rapidly then either it is not seeing the key,or the transciever module is not communicating with the PCM. It could be the transciever or it could be the PCM is not powering up for ...

...PCM) (also known as the Engine Control Module/ECM) over the Controller Area Network (CAN) data bus. The ETC indicator Light Emitting Diode (LED) is completely controlled by the instrument cluster ...

...light blinks when the system is armed. Normal. Your key has to be able to communicate with the receiver in the ignition area. Does your other key work ok? Anti-Theft The passive anti-theft system ...

...PCM has power and theft light flashes once every two seconds. Key turned to start the theft light flashes rapidly and nothing happens! Suspect the PATA Transceiver no broadcasting it's frequency. How ...

...light continuously. ?€¢ The PCM will become fail-enabled for future ignition cycles. If a failure occurs when the ignition is off, while the VTD system is not fail-enabled, the PCM will never receive ...