2000 Ford Taurus "change front end bushings" Questions

Ad

After changing the front end of our 92 Ford Taurus, we still have a clicking noise when turning to the left or right. Have tested most everything. anti roll bar bushes or suspension bushes covers...??

Ad

...of bushings, tie rods etc. Rotate tires & see if it continues, if not, it's the tire, if still there, have front end checked for loose/worn parts, and re-check front caliper not

Ad

Question about Ford Taurus

1 Answer

...done. If there is squeaking noise then the bushings should be changed. If you have not done any work on the front end in 10 years I would also change the wheel barrings if older then five

...front end have to change lower control arm pin and bushing and front struts the only parts that look old are the struts and lower control arm bushing causing tow out if you only replace one side,you ...

...front end alignment. At my wits end i decided to look on line for help. Thank you all of you for your help. Tomorrow i will change the sway bar links and bushings and see what happens. ( fyi, this is ...

Question about Ford Taurus

2 Answers

...front end drivers side. I think its the stabilizer bushing is shot. It looks easy enough to change. should I change the whole stabilizer bar or just the bushing? Just the bushings, normally the ...

...front end ball joints brakes you name it i changed it even the upper control arm bushings. Problem went away for about 3 days after changing the upper control arm bushing, now it's back. Does anyone ...

...front suspension arm bushings. Tie rod ends, ball joints at bottom of front struts may need grease or replacement. Auto supply houses carry rubber lubricants--don't use motor oil--WD-40 works but ...

Question about Ford Taurus

2 Answers

front strutt bush very loose , steering very woolly replaced wishbone and track rod ends only thing i can think of is new bushes to solve the problem. If the bushings are worn, then it is best to ...

front right tire suspension squeaks at every bump and turn have the frontend checked out....can be ball joint or tie rod ends.....It can also be control arm bushings or swaybar bushings..Try spraying ...

Not finding what you are looking for?
2000 Ford Taurus Logo

3,186 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2001 Ford Taurus
2001 Ford Taurus

2,262 Questions

2002 Ford Taurus
2002 Ford Taurus

1,869 Questions

1998 Ford Taurus
1998 Ford Taurus

1,431 Questions

1996 Ford Taurus
1996 Ford Taurus

1,365 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...