2000 Ford Contour "remove 2" Questions

Ad

Question about Ford Contour

1 Answer

...2 "handles" and gently pull the radio out of dash area. The terminals have lock tabs that you need to depress to thus remove the speaker and power terminal connections. Auto Zone, Advance Auto, O' ...

Ad

...2 liter motor Remove the thermostat housing. Remove the bolts. Remove the housing. Thermostat Housing —Vehicles with 2.5L Engine Removal Disconnect the battery ground cable. Drain the cooling system. ...

Ad

Question about Ford Contour

1 Answer

2. remove wheel 3. check to be sure parking brake is released 4. remove brake drum 5. remove brake shoe hold-down springs 6. disconnect the parking brake cable 7. Remove the lower retracting spring. 8

Question about Ford Contour

1 Answer

...2.0L... Disconnect the negative battery cable. Remove air intake resonators. Remove starter motor upper mounting bolts. Raise and support the vehicle. Remove the nuts on the starter terminals and ...

...2. Remove air intake resonators. 3. Remove the air cleaner-to-throttle body tube and the mass airflow sensor. 4. Unplug the connectors and remove the cables from the alternator. 5. Raise and support ...

Question about Ford Contour

1 Answer

...Remove 1 / 2 of the brake fluid from the master cylinder reservoir. Raise and safely support the vehicle. Remove the wheels. Remove the cotter pin and guide pin. Fig. 1: Rear disc brake components ...

Question about Ford Contour

2 Answers

...upper hose that runs into the engine block that is connected to the housing. Remove the 2-3 bolts, the housing and the thermostat. Put the new one in and replace the bolts. That is all there is to

Question about Ford Contour

1 Answer

...remove original key and turn new unprogrammed key to run position. The theft indicator should prove out for 2 seconds. New key will start vehicle. Repeat this process for additional key programming. ...

...2. Remove the air intake resonator using a hand wrench or ratchet and socket. 3. Remove the air cleaner tube and the mass airflow sensor. 4. Reach down to the alternator and disconnect the plugs and ...

Question about Ford Contour

1 Answer

Remove the bulb(s) and inspect the socket base. Clean out any corrosion. The back up light switch is on the shift linkage. The Switch could have shorted internally or the wiring from the switch to the

Not finding what you are looking for?
2000 Ford Contour Logo

591 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Contour
1998 Ford Contour

875 Questions

1999 Ford Contour
1999 Ford Contour

534 Questions

1996 Ford Contour
1996 Ford Contour

353 Questions

1995 Ford Contour
1995 Ford Contour

309 Questions

1997 Ford Contour
1997 Ford Contour

276 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...