2004 Dodge Stratus "crank shaft" Questions

Ad

Question about Dodge Stratus

1 Answer

Crank shaft sensor Had the car put on the computer, code came up crank shaft sensor. We replaced it and the car has no spark. was the insulation on the wiring harness of your old crank sensor damaged ...

Ad

Question about Dodge Stratus

1 Answer

...cranksensor in a 2005 dodge stratus You can find the crank shaft sensor in your car under the starter located over the motor mount..You have to remove the starter to reach to the crank shaft

Ad

...and now there is an oil leak at the crank shaft are you sure its at the crank shaft. that wouldnt have caused that problem, i make sure that its not coming from your oil pan gasket or your drain ...

Question about Dodge Stratus

1 Answer

crank shaft sensor. Where is it located? im havin the same problem too.i did replace the crank shaft sincer.with no luck.i think it may be the plug that is conected to the sincer. the only other thing

Question about Dodge Stratus

2 Answers

Crank shaft sensor We just replaced the Crank shaft sensor on my 2001 dodge stratus and the car will still not start what could this issue be replacing the crankshaft sensor might solve the problem. ...

...crank shaft I got a code that stated that I needed to change the crank shaft sensor and wire harness so I did. The car will not start. It will turn and sound like it wants to start but does not. What ...

...crank shaft pulley removal a harmonic puller won't help you any! be sure to have your timing marks bang on the cam shaft gear and crank shaft pulley these valves will bend if it jumps!hope this

...crank shaft cogs with the engine marks. I removed the 8mm bolt toward the rear of the engine and was able to insert a pin in ~60mm. Then installed the CPS plate to crank aligned the oil pump marks to ...

Question about Dodge Stratus

1 Answer

...excatly same problem, found this sequence to ge the car running again..turn off ign, unplug cam position sensor, crank for 2 seconds, connect cam shaft sensor, crank again and it starts like

...you need to have a special tool. there's an insert that you have to put inside the crank shaft hole. I had seen people pulling/pushing on the crank pulley at the same time and break it. so be

Not finding what you are looking for?
2004 Dodge Stratus Logo

2,090 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Dodge Stratus
2001 Dodge Stratus

1,121 Questions

2002 Dodge Stratus
2002 Dodge Stratus

924 Questions

2000 Dodge Stratus
2000 Dodge Stratus

772 Questions

2006 Dodge Stratus
2006 Dodge Stratus

621 Questions

2005 Dodge Stratus
2005 Dodge Stratus

528 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...