2004 Dodge Intrepid "po344 engine code" Questions

...engine light and error codes po340-& po344 code po 340 no camshaft position sensor signal at powertrain control module and code po344 rationality error detected for intermittent loss of camshaft ...

...po344 intrepid engine light comes on my 2004 chrysler intrepid.....po340 and po344 cam sensors...what do i do now and about how much will it cost? Take a look at this ...

po344 and we have replaced t cam sensor. This is common, i've run into this problem, the aftermarket sensors are not right you will need a dealer sensor and theres an update reprograming that needs to

...engine light coming every so often. It seems that after I fill the tank and get down around 3/4 tank, The message I'm getting is "EVAP Emission Control System Purge Flow Fault". PO441 and PO344 came ...

...engine code is po344,cam signal.where do I go from here? Both crank and cam sensors have a 8 volt reference I have found the wiring melted together where it cross over transmission shorting out the ...

...PO344. can you assist in advice to solve these problems p0339 is crank shaft position sensor related error. you need to be sure that its wiring is not damaged and it is not shorted somehow. if it is ...

I have engine code PO344 on myy durango 5.9 litre sounds like an o2 sensor google the code !

Engine Light Code PO344 Cam sensor closed circuit. Does the car run poorly or get mad fuel economy? I would suggest getting both the cam and the crank sensors replaced at the same time as they usually

...po344 problem CamShaft position code - P0344 Camshaft Position Sensor Circuit Intermittent P0344 is the camshaft position sensor. Here is a video for replacing the sensors on the 3.6L engine (same as ...

engine cuts out @2400 rpms 2003 dodge stratus,4 cylinder dohc, runs fine up to 2400 rpms then studdards. If you back off and keep the rpms under 2400 it runs fine. Light comes on & it does it, ...