2004 Dodge Intrepid "crank" Questions

Ad

...isnt getting spark i replaced the coil pack what else could be the problem it's not a fuel problem cranks just fine all fuses are fine the crank sensor sends the signal to the coil, i would check it ...

Ad

had to take timing belt off ,need to reset car wont start is it a clean crank or a lazy slow crank ? if clean crank check to see if you get a spark or pulse at the injector slow and lazy crank double ...

Ad

dodge intrepid 1997 3.5 engine code p0320 it will not start. This means there is no crank reference at the pcm the crank sensor is a common problem with that vehicle but I would be sure to check for ...

...tied in with the tach,my car quit running going down the road and now it does'nt want start.Its cranking over but the tach is'nt moving 96 intrepid 3.5 engine. crank sensor is tied in with the ...

...the fuel pump twice in two weeks with a used 99 dodge intrepid fuel pump and both times they crank the car one time and then quits the car cranking over has nothing to do with the fuel pump

Question about Dodge Intrepid

2 Answers

1997 dodge intrepid crank no start fuel pump supplying 60 psi to rail, no power to ignition coil but if cam or crank sensor no good why is there fuel pressure? check the asd relay swap it with another

Question about Dodge Intrepid

1 Answer

I NEED TO KNOW THE LOCATION OF THE CAM SENSOR AND CRANK SENSOR ON MY 1999 DODGE INTREPID 2.7 LITER Cam sensor is right in front under the planum and crank sensor is by the crank harmonic balancer ...

Question about Dodge Intrepid

1 Answer

crank shaft how to replace the crank shaft on a 3.2l motor You must remove the engine from the car and then pull it apart to replace the crank, this is a very time intensive job that requires lots of ...

1994 dodge interpid wont start have no power going to the coil pack is it a crank sensor or something more serious like a computer is there a way to check the computer i have to put on a crank sesor ...

when i roll engine to TDC the cam shaft markes are on the bottom of cam shaft sprocket Turn the crank shaft ONE more full turn and check the cam marks again. This is because the camshafts rotate once ...

Not finding what you are looking for?
2004 Dodge Intrepid Logo

790 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...