2002 Dodge Caravan "side light bulb change" Questions

...light on the driver side, the directional , the 4 way flashers , the breake lights all work. the parking lights are not . I ve check the fuse under dash board, and change all bulbs the right tail ...

No change to the driver side head light. Well it was the weird electrical situation but I got it fixed. For my premium service please email back and I will give you what fixed this non common problem

side blinks really fast front works back dose'nt. changed bulbs checked fuses, everything was fine. what should i look for ? I think you need to change the blinker, my car has the same problem, but we

...side signal light. i need to know how to get the tail light lens cover off to change bulb Open hatch and on inside of body where the lens is are two horizontal screws going into the lens, remove them ...

...light the left side directional light is not working so it need to replace it is a dodge caravan 1996 To replace your turn signal - There are 3 screws on the front of the light assembly. Remove them ...

...side of the tail light you will see two phillips srcrew take them out and your tal light will slide right out, then you will see the harneses from the diferent bulbs, find the one that is blown and ...

...light, open the hatch and remove the two screws. Depending on weather you buy new or used, you may have to replace the board on the back. For the headlight, open the hood. There are two 10mm bolts on ...

...side of the vehicle, look behind the headlight enclosure. You will see a set of wires running into the back of it. This is the power clip. Either with your hand or a flat-head screwdriver, pop the ...

...side read light as the bulb need replacement and what is the bulb replacement number to purchase To change the bulb. Using the trim tool or a very small screwdriver. Start on the windshield side. ...

...light is on the left hand side of the car. the car is a tarago. with the trunk open, there will be 2 or 3 screws holding the light assembly onto the car.. remove the screws and the assembly will pop ...