2001 Dodge Durango "valve lifter oil filter removal" Questions

VALVE LASH AT ROCKER ARM AND PUSHROD TO THE LIFTER BEFORE IT PUMP OIL.IF ENGINE HEADS HAS NOT BEEN REMOVED.OIL NOT PUMPING.POSSIBLE CAUSE RESTRICTED OIL PASSAGES OR WORN OUT VALVE LIFTERS AND CAMSHAFT

valve job a mechanic can tell. (I had a 94 same noise, traded it in!) Heavy oil like 20w50 usually isn't the answer for collapsed lifters. Ticking usually happens when the oil supply to one or more of

Valve Lifter Oil Filter Removal and Installation Procedure Disconnect the oil pressure sensor electrical connectorRemove the oil pressure sensor and washerremove the oil filter and o-ring (you may ...

is due to a clogged oil pan filter and gunked up lifters. Remove oil pan and clean screen filter. Use and internal engine cleaning solution before your next few oil changes to clean valves and lifters

...lifter like sea foam.If it keeps making noise find out what side and which end of the valve cover. Remove valve cover have someone start the engine touch the top or the rocker arms by the push rods ...

...oil for 24-48hrs prior to install so they are pre-filled before install. Replace the rocker assembly and torque down to specs. replace valve cover and then start the vehicle. Check that there is no ...

...valve train resulting in a noise until oil pressure is restored It sounds like a typical hydraulic lash adjuster/lifter noise. Could be caused by a number of things - low oil level, wrong oil weight, ...

...valve noises.Have 90,000 on rebuilt engine. Good oil pressure not over heating. Pulled driver side valve cover #4 valve is extremely lose, 3/8 or more play.Can i replace the cam and lifters. ...

...valve hydraulic lifter. Try running some lifter cleaner in the oil--check with an auto parts supplier for a good brand. If the car is about due for an oil change, wait until that time to use the ...

oil to help clean out the valve lifters and help with the tapping on start-up. Oil pressure would not suffer because instead of going through the filter it is bypassing around it with no pressure drop