1997 Dodge Stratus "unplug map sensor runs" Questions

Ad

Question about Dodge Stratus

1 Answer

...this code mean. Can you help me solve my problem. I have just put a oxygen sensor on because I was getting a reading for this. your map sensor is either unplugged ,defective, or you have vaccum ...

Ad

Question about Dodge Stratus

3 Answers

...MAP, Manifold Absolute Pressure sensor. It is located, on the 2.4L, right in front of the radiator fan on the intake manifold. Two screws and unplug it. It comes with an o-ring so remember to replace ...

Ad

unplug the MAP sensor it runs perfectly fine. I know for a fact that any of 3 things could be wrong how do i determine which sensor is bad? I fit runs good, gets decent gas mileage, and you don't have

Question about Dodge Stratus

1 Answer

...unplug it? that is not a map sensor(mass air flow) it is a barometric switch also know as a mps(manifold pressure sensor) if your vehicle idles fine but when you try to accelarate. i have a question? ...

Question about Dodge Stratus

1 Answer

unplug the MAP sensor. The scan tool MAP reading should indicate that there is no voltage present. Check that the ground from the PCM is intact and also that the MAP sensor connector and terminals are

unplug the MAP sensor. The scan tool MAP reading should indicate that there is no voltage present. Check that the ground from the PCM is intact and also that the MAP sensor connector and terminals are

...map sensor whil running and nothing happened. No change in engine running at all. Shouldn't unpluging the MAP sensor cause a change in the running of the engine or even a service light. Could this ...

runs with the map sensor unplug when plug wont run replace the map sensor, it is getting the wrong signal. this should fix the problem.

Question about Dodge Stratus

1 Answer

unplug the MAP sensor. The scan tool MAP reading should indicate that there is no voltage present. Check that the ground from the PCM is intact and also that the MAP sensor connector and terminals are

unplug the MAP sensor. The scan tool MAP reading should indicate that there is no voltage present. Check that the ground from the PCM is intact and also that the MAP sensor connector and terminals are

Not finding what you are looking for?
1997 Dodge Stratus Logo

509 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Dodge Stratus
2004 Dodge Stratus

1,417 Questions

2001 Dodge Stratus
2001 Dodge Stratus

1,121 Questions

2002 Dodge Stratus
2002 Dodge Stratus

924 Questions

2000 Dodge Stratus
2000 Dodge Stratus

772 Questions

2006 Dodge Stratus
2006 Dodge Stratus

621 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...