1997 Dodge Stratus "screw tighten cable convertible" Questions

...screw attaching the support bracket for air conditioning lines from the right side of the radiator. Remove the support bracket. Unplug the cooling fan wiring. Remove the air conditioning condenser ...

...tighten the mounting screws. Install the right side instrument panel support strut. Install the front and rear console halves. Install the shifter bezel and gearshift knob. Install the lower knee ...

cable) nut to 84 inch lbs. Tighten the starter solenoid S terminal nut to just 20 inch lbs. (2.5 Nm). Install the torque converter covers and tighten the torque converter cover screws to 89 inch lbs.

cable) nut to 84 inch lbs. Tighten the starter solenoid S terminal nut to just 20 inch lbs. (2.5 Nm). Install the torque converter covers and tighten the torque converter cover screws to 89 inch lbs.

...screw jacks and remove the rear cradle bolts. Loosen the front cradle bolts and slightly lower the Engine cradle. Remove the remaining exhaust manifold-to-cylinder head bolts, the AIR pipe, and the ...

Tighten the bolt to 35 ft. lbs. (50 Nm). Position the A/C compressor in place and install the mounting bolts. Route the electrical harness along the left side of the engine and connect the connectors.

tighten the bolts to 32 ft. lbs. (43 Nm). Install the plastic flywheel cover and screw Reposition the wiring harness, and screw in the retaining harness clips. Reconnect the wiring to the solenoid and

...Tighten the screws to 80-106 inch lbs. (9-12 Nm). Install a new oil filter. Install the engine rear plate/converter housing cover. Install the starter motor. Install the Y-pipe converter assembly. ...

...cable is disconnected. Remove the steering wheel, as outlined in this section. Remove the upper and lower steering column switch trim. Refer to the Turn Signal (Combination) Switch or Multi-function ...

...screw and tighten to 71-88 inch lbs. (8-10 Nm). Attach the sensor harness connector, then connect the negative battery cable. Dual Crank Sensor Sections 3 and 4 of this manual also cover testing, ...