1997 Dodge Stratus "check crank sensor" Questions

...it and the car has no spark. was the insulation on the wiring harness of your old crank sensor damaged in anyway. if it was damaged then it was also grounded which means you need to check your ...

...crank Check some fuses or see if you are getting any kind of spark. Spark at the plugs or injectors. do you have access to a OBD2 scanner? Plug that in and pull ALL the codes, that should at least ...

no spark check crank and cam sensors. do you have any codes? could be a coil pack, but check the sensors, they are common. if you have a scan tool w/ live data, you can check for cam and crank signals

crank sensor singal", first check crankshaft to camshaft timing. if belt is ok and timing marks line up then i strongly suggest removing the bolt from the camshaft that holds the cam gear on. with the

crank sensor. just because you have a code does not mean its a bad sensor. There are other reasons the code can set. The other half of the crank sensor is a magnet inside to cover. You need to inspect

...engine? change cam sensor. check wiring. cam sensor can make the pcm think the crank is bad. you may have bad wiring. that year the wiring goes over the exhaust manifold it could be metaled ...

...check for fuel problems. Clogged filter, bad fuel pump, bad gas.. Get car scanned for codes at most parts stores for free. Could be a CPS crank position sensor or cam position sensor. If crank sensor ...

...check the cam and crank sensor signals. I realize you replaced the crank sensor. Any applicable trouble codes? I don't know what testing you have done? With idle issues clean the throttle body and ...

...check the ignition timing to make sure timing is ok. if all the above is ok it should start. Could be an engine imbolizer. The engine cranks so starter is engaging. Power to coil which is good. No ...

...Check Engine light shows P0340, which is something about the Camshaft sensor. I've replaced said sensor, cleared the codes but after attempting to turn over CEL comes back on and with same ...