2003 Chevrolet Malibu "power blower motor resistor" Questions

Ad

...3, only on 4 and 5 check power at blower motor resistor. it is beside the blower motor under glove box. if power to resistor then resistor may be bad and not letting any of theother speeds to

Ad

Question about Chevrolet Malibu

1 Answer

...is the resistor or the motor itself that needs to be replaced Check for power and ground at the electrical connector at the blower motor.  If power and ground is present, the resistor is

Ad

Question about Chevrolet Malibu

3 Answers

blower motor power cable located on the forward side of the blower near the firewall. Not necessary on some models. 4. Remove the jumper cable link to the blower motor resistor located on the resistor

Question about Chevrolet Malibu

2 Answers

Blower motor or resistor? My fan speeds 1 , 2, 3 did not work, soon speed 4 went and speed 5 only worked now none of them work I have no heat now. Before speed 5 stopped it started making a loud noise

...power, replace the blower motor itself. Remove the screws and unplug the connector to remove the blower motor resistor. Put the new one in its place by screwing it back in and plugging in the wiring ...

Question about Chevrolet Malibu

1 Answer

...right blower not working test for power and ground at the motor if its there replace blower motor with a 12 volt test light if its not its the blower resistor wicth is write behind the blower

...blower moter and disconnect the purple/black power connector to it - - you'll need this extra room to work with. 2 more screws, same size, 6.5mm on mine, 7or 8mm on some others, that holds the blower ...

Question about Chevrolet Malibu

1 Answer

when testing for power. If you have power (key on, set to high) and no blower operation the blower motor needs replacing. The resistor you replaced is a very common failure on these. Give me an update

Question about Chevrolet Malibu

1 Answer

...dash on pass side. up close to firewall by the blower motor. need to confirm power is not going to fan also if you have power and ground to fan it is bad fan motor. if not most likely a bad ...

Question about Chevrolet Malibu

2 Answers

...power to the blower motor with the Key ON and Blower set to HIGH. Unplug the electrical connector for the hot wire and use a known good ground. If you have about 12 Volts with no electrical connector ...

Not finding what you are looking for?
2003 Chevrolet Malibu Logo

1,630 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...