Timing belt tensioner stuck in tight position A friend of mine has a 2001 Chevy Venture that had a squeaking timing belt and without knowledge of automotive. So he began to replace the belt with the ...
...tight. These can weaken over time and cause a rattle noise and belt slippage. There is timing chain in 4 wheeler, its generally for bikes. The car has a timing belt and a tension adjuster for TUNING ...
Question about Chevrolet Venture
...timing belt tension on a 1999 dodge stratus The belt tensioner is not adjustable. To loosen a tensioner you would swivel the belt tensioner away from the belt with a long flex wrench ...
timing belt and tensioner and it keeps jumping time and the belt wants to slide off and I don't know what else to do You don't have the tension right. Belt should be tight when tensioned, tight enough
...tight. Timing belts are supposed to be replaced in intervals, on this vehicle every 60,000 miles. The timing belt may look good, but they mostly stretch over time. As for the looseness and becoming ...
...timing belt cover and by using a T-10 tool turn the bolt which is behind the tensioner and easy to see,until the belt is tight.After do so remember to tight the nut of the tensioner and start the
Question about Chevrolet Venture
...timing belt of a 1991 dodge spirit 2.2 engine how tight do you adjust the belt The belt tensioner is automatic, to set the initial tension install the belt rotate the engine with the ...
Question about Chevrolet Venture
...pointer. Align how? Timing belt tensioner has a white dot instead of pointer. Not sure how to line it up. belt tensioner does not have to be lined up to anythng as all it does is keep the belt
Question about Cars & Trucks
...tensioner is being adjusted to tight. The timing belt should have 1/16 of an inch free play between the crankshaft and cam pulley when adjusted properly. Too tight will damage the tensioner
...timing belt keeps sliding off after replacing belt,tensioner,pulley and water pump and it is driving nuts If the belt is tight, and the tensioner is keeping it tight, my guess would be one of the ...
863 questions posted
Usually answered in minutes!
776 Questions
608 Questions
460 Questions
342 Questions
278 Questions