2001 Chevrolet Venture "problems engine miss" Questions

engine-miss-and-truck-jumps-hard-to.html ----------- Bad miss at idle? http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html ----------- While stop engine idles like cylinder missing? http:/

...the sensor fixed the code but the engine still runs rough and stalls, it could be a leaking injector or a problem with the throttle body. You would need to know which cylinder is causing the

...engine light on , and now the Abs light. Don't know what to make of it. After my mechanic installed the new rad, I had the rad light on as well. The dealer said it needed a new head gasket , but the ...

...problems. You need to have the clutched replaced.....if you shop around in your area you may be able to get away for $800-$900. 145k is an appropriate mile marker for a chevy van than has spent most ...

I have a chevy venture ,year 2000, the problem is ,the tempure gage goes all the way to hot and the cooling fans does not comes on, i am thinking that the termastat mabe bad. how can u help ? Check ...

Never overheated (and still not certain I did) BUT Sat nite(Feb 6 2010) after a run about 20 miles the 2001 venture started to loose ground like it was runnning outta gas. HAd plenty. It was -10 C ...

miss fireing and rough idle and no spark in three cylinders 911 what could possibly wrong well certain comp loss up to 75psi will still keep the engine running.with less power and a little shaky motor

...problems with the ignition. Our master was damaged so we got a new pk3 transponder key cut and tried to program it but it still won't work. We did the turn it to on for 10 minutes then to off 3 ...

'02 Chevy Venture Overheating Problem This car overheats within 5 min. of driving, both front and rear heaters blow hot for several min. then cold and the engine temp rapidly rises and overheats. ...

Randomly, my 1999 Chevrolet Venture van will sputter/misses only in the morning. I have brought it in to be serviced for the second time for this problem and the mechanic stated that the ignition ...