2000 Chevrolet Lumina "fuse turn signals brakes" Questions

Ad

Question about Chevrolet Lumina

1 Answer

...turn signal lever. - To check the brake light fuse, open the passenger door and remove the fuse panel cover that is located around the corner from the glove compartment. On the back side of the fuse ...

Ad

...turn signal doesnt work and my brakelights not working on a chev. 97 lumina Check the fuse make sure it is not busted and also use a designated amp only. Check the bulb and the wires also. These are ...

Ad

I've check or replaced fuses, turn signal switch, and flasher switch and still no brake or turn signal have you tried the brake light switch? it is mounted on the brake pedal and when you press the ...

Question about Chevrolet Lumina

1 Answer

...from the fuse goes to the brake switch then to the signal light switch and from there to the rear lights, test for signal from the brake switch to the turn signal, if good the signal switch is ...

...fuse is good and the switch is good. The third brake light bypasses the turn signal switch. If the rear turn signals are working than we also know that the wiring from the switch to the rear bulbs is ...

My turn signals and brake lights don't work I think the fuse got wet. Now the turn signals and brake lights don't work. doo they use the same fuse SHOULD BE SEPERATE FOSE

...is there anything else that needs to be rp;acedto make brake light work If you have already check fuses, and brake light's still don't work, it's going to be your turn signal switch, the brake

...fuse so the battery doesn't go dead, but can't figure out why they are staying lit. The brake lights are wired through the turn signal switch. If the brake light switch itself checks out OK ...

...but the window brake light does, what could be the problem? I have checked the bulbs and the fuses for both the turn signal and the brake lights. i am wondering if the turn signal is the ...

Question about Chevrolet Lumina

1 Answer

...fuse is GOOD then check wires at the brake switch. Orange should have 12V, when brake pedal is pressed then the WHITE should have 12V and lights should be on. the center rmounted stop light (BACK ...

Not finding what you are looking for?
2000 Chevrolet Lumina Logo

228 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...