power sliding door . Click the search button then the blue link. Looking at the diagram you will see a control module is used . Also reading factory service info. on how it works would be a good idea.
Power sliding door handle does not work. Can open Power sliding door handle does not work. Can open the door with the key remote and the button inside the van. But when I try to manually open the door
power sliding door. She can open it manually, but it no longer opens with the remote or the buttons inside the vehicle. Any ideas? locate the relay in the fuse panel under the dash board for the doors
Power sliding door stuck open 2002 Venture My driverside power sliding door is stuck open and won't move. How can I solve the problem? first check the grounds make sure nothing is blocking its way ...
power door module . IGN 1 fuse 10 - hot when key is in run or start , plus radio fuse - 10amp . underhood fuse box . The sliding door circuit breaker gets B+ from BATT MAIN 2 fuse 60amp location under
power slide door dosent close all the way power slideing door dosent close all the way CHECK THE PIVOT HINGE AT THE REAR OF THE DOOR, IF BAD IT WILL THROW THE DOOR OUT OF ALIGNMENT. THE STRIKER AT THE
...power sliding door After replacing the left sliding door and arrempting to adjust cable tension per information from GM, slidilng door will close, but not latch. it immediately goes back open. I can ...
...neither the interior buttons nor remote control buttons will open/close the power sliding doors. they can only be opened manually. the plungers are not making good contact swivel them ...
power sliding door lock is "stuck" in the lock position. we can no longer open the door. i tried removing the fuse for power locks and sliding door I had the power sliding side door locks recalled on ...
882 questions posted
Usually answered in minutes!
776 Questions
549 Questions
460 Questions
342 Questions
278 Questions