Question about Chevrolet S 10
...ignition and key alarm switch (click image for zoom) Remove the column shroud halves. Remove the column-to-dash attaching bolts and slowly lower the steering column, making sure that it is supported. ...
remove the 10mm screw from the frame, clean frame and connector thouroughly and reinstall, good luck 2 you! marty Fuel cuttoff switch? Look in your manual for location... Maybe down by the passenger's
...remove the bulbs from their sockets. If ALL the lights (head, tail, dash,etc. are coming on all the time), then those aren't DRL's. There's a light sensor (little round black dome) on top of the ...
...remove the spark plugs and try to start the engine. (disable the ignition system by disconnecting power to the ignition module). If fluid comes out of one or more of the cylinders, then a blown head ...
...remove the resistor, and found that the motor was still going with key off and out... I disconnected the connector from the resistor, and found that the far left (large red wire) prong is quite ...
1,037 questions posted
Usually answered in minutes!
1,473 Questions
904 Questions
790 Questions
686 Questions
620 Questions