1999 Chevrolet S-10 Pickup "adjusting shift linkage" Questions

Ad

Question about Chevrolet S 10

1 Answer

...linkage there it an adjustment bolt.....with the shifter in park loosen the bolt,move the adjuster up on the shaft as far as you can without forcing it too much,tighten the bolt.......adjust as ...

Ad

...shift linkage bushings and the Shift lever bushings are probably worn. Adjustment of linkage and shift lever is probably needed. If this is beyond your DIY capacity, I'd take to a competent ...

Ad

...shift it into reverse, it feels like neutral. Also, I don't think its the transmission itself, because I've replaced the transmission with a new 700r4 and am still having the same problem. After ...

...cases have a shift fork for mode (2 or 4 wheel) and another for range (high or low) If your shift linkage is properly adjusted you have an internal problem that will require disassembly to ...

Question about Chevrolet S 10

1 Answer

all gears gone. only 4th gear works. Putting my 3rd manual transmission into a 1988 Chev S10 2.8v6 4x4. Whats the problem with this tranny? Is there an upgrade? Try adjusting the Shift linkage

...work. the problem was there was no vacum at a switch under the hood on the fire wall also your shift linkage could be out of adjustment. try driving down the road and raise up a little on the

...shift by its self or into over drive at all need help thanks robbie Try adjusting the transmission rod on the side of the transmission put it in park then put on the e-brake and move the shifter rod ...

Question about Chevrolet S 10

3 Answers

...could be bad.the shift linkage out adjustment or loose damaged parts.  Could just be low fluid level in clutch master cylinder if you haven't checked in a while or maybe have a leak as I

Just had clutch, flywheel, Throwout bearing, ect. replaced-now will not shift into reverse after moving forward without raking gears and having to force into reverse. The clutch pedal now has very ...

...shift the way it should?? thankyou The 700R4 is controlled by vacuum lines and throttle cable kick down linkage (TV) and need to be re calibrated to the engine as to being 4.3 or 5.0 to 5.7. Best ...

Not finding what you are looking for?
1999 Chevrolet S-10 Pickup Logo

1,037 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...