...ten bucks if the latch apears to have been pushed up then us a block of wood and 2.5lb hammer and bash it back down then try the fit, i think it's circular on that model, if so place some paper tape ...
Question about Chevrolet Malibu
...marks for 98 elantra 2.0 1.8 l the camshaft is the dot on the sprocket there is a small mark behind it on the cover 12 oclock the crank there is a mark on it look to the ten oclock number 1 tdc you ...
marks on the cam gears align with to v cut outs on the timing cover backing,they will point inward ,one at about one o clock,and the other at about ten o clock.,on the crankshaft timing cog,there is a
...the 2 o'clock position The exhaust cam EXH mark should align with the other silver link at the ten o'clock position Hope that ...
...passlock system, Turn the engine two seconds then leave the key in the run position for exactly ten minutes...the anti-theft security light should go from blinking to solid at the ten minute
...ten degrees which one is five degrees do i go between the hash marks . I was reading on the net( stop-the-star- program.3084.x6.nabble.com that the initial program is for 5 degrees advanced but all ...
...mark or do i hold the check mark down? push relearn again then press and lock and unlock for about ten seconds till u hear ...
marks aligned.campulley must be at zero with hole to the top.that hole must line with a slot on the head.bottom sprocket must be turned to the ten two position liningup withslot.fit timing beltin anti
where are the timing marks on a 2004 ford ranger 2.5td bottom pulley has a pointer and there is a grove in pulley your diesel pump is joint with chain appox ten oclock cranckshaft twelve
...at night, could this be a fuse? yes, i would check the fuse marked "tail lights" nine times out of ten, if you have no dash lights you won't have tail lights
1,892 questions posted
Usually answered in minutes!
1,257 Questions
1,094 Questions
1,067 Questions
997 Questions
1,026 Questions