1999 Chevrolet Cavalier "extractor head" Questions

...HEAD AND I CAN'T FIND THE OIL NOZZLE AFTER I REMOVED THE DRIVE SPROCKET. PLEASE HELP. Not good. The only way to get that bolt out is to buy a bolt extractor kit. You will need to drill a hole in the ...

...wrench if it will fit. last resort vise grips. if all else fails left handed drill bits and screw ...

...head restraint sleeve extractor (special tool 6773) (Fig. 1) and (Fig. 2) into the seat back. (4) The retaining tabs are positioned on each side of the sleeve, when inserting the extractor, ensure ...

...head off so i can take it to a machinist and get the bolt removed? If you have a Drill Machine and access to the snapped bolt, then drill a hole smaller the bolt size in the cetre of the bolt, then ...

...head slots were cut off. In this case, you need a bolt and nut extractor. It looks like a nut socket with a special tapered spiral design.

How to use - The first drill a hole in the bolt. Then ...

...head, try using a different size wrench or socket that fits more securely. Use a bolt extractor: A bolt extractor is a special tool that can be used to remove stripped bolts. It works by gripping the ...

...head bolt heads are sheared off the only way you can remove it is by purchasing an easy-out kit, or and easy out extractor for the size bolt you are trying to remove. go to an auto parts store make ...

...head bolt and making it worse. An extractor kit is about the only way to take this out and like I said it is not easy but with confidence you can do it. I hope this helps you and if you have anymore ...

head ? Note: in answer to your probable question: I waited about 6 hours after last use of the car; but with AZ heat that was obviously NOT enough time - won't do that again. :-( If you have the nerve

...end of the wiper arms their is a 13mm headed nut ,slacken this nut off then using a two legged mini extractor pull the the arm off the shaft then reposition them ,i bought a cheap extractor in the ...