1999 Chevrolet Cavalier "alternator belt" Questions

Ad

...alternator back on the car. Belt still too short. The belt came off the car so it should go back on. Anyone have a clue as to what I might be doing wrong? I'm using the routing diagram I found online ...

Ad

belt on a 1983 chevy cavalier It's alternator. Do you have a serpentine belt or seperate belt. If seperate, there are two bults on the alternator. Loosten both but do not remove. Take a prybar and pry

Ad

Question about Chevrolet Cavalier

2 Answers

...MOUNTING BOLTS.PUSH THE ALTERNATOR INWARDS TO AND SLIP THE DRIVE BELT OFF THE ALTERNATOR PULLEY.IF YOU REMOVED THE ALTERNATOR FROM THE IMFORMATION ABOVE.YOU SHOULD BE ABLE TO GET DRIVE BELT BACK

Question about Chevrolet Cavalier

1 Answer

belt on the alternator first. There is a bracket that is attached to all the pulleys that seems to get in the way and doesnt allow to install the alternator with one bolt to use as a pivot point. Dont

Question about Chevrolet Cavalier

2 Answers

...belt to alternator-if good check wiring and connections to battery and alternator if good than have battery and alternator tested most auto stores offer this service for free ur battery or alternator ...

...alternator inwards, then slip the drive belt off the pulley. Fig. Unfasten the lower rear mounting bolt Fig. Loosen the rear upper retainer Remove the mounting bolts, then remove the alternator from ...

...belt off and mount the alternator in the proper position. Get the belt around all the pulleys except the A/C compressor or Alternator. The tensioner pulley is on a spring loaded arm. Get your socket ...

...on the alternator. then it runs the back of the belt onto the water pump, third its back goes onto the tensioner and fourth the belt runs onto the steering pump just as the alternator did, facing

...belt Replaced alternator on '98 Cavalier. Can get belt on and can't get pulley to loosen belt to get over last pulley. The bolt in pulley is turning but the pulley is not. turn bolt until it tightenc ...

Question about Chevrolet Cavalier

1 Answer

...alternator/serpentine belt, either by pushing the spring loaded belt tensioner back using a 15mm wrench (a pain in the arse), or by cutting it with a knife (much easier), seeing as you should replace ...

Not finding what you are looking for?
1999 Chevrolet Cavalier Logo

1,664 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...