1997 Chevrolet Lumina "rusted shift cable" Questions

...shift process is through a cable then check the cable for wear and fraying, rust or dry. If it is through linkage check for worn /rusted /tight connections Try removing the plastic cover below the ...

automatic transmission shifts down on its own the kick down cable must have slack, at idle. if not its bad. (end to end, something is wrong with it) this cable is for passing gear. you jam the ...

...shift and drive. last decade or? i guess the box is rusted up solid. NO to park is usually a free trip but park to any other gear is blocked if brake lamps are dead. called park lock out. at side of ...

...shift cable.if possible heat nut on cable and move cable out of way and carefully pry between shift arm,put brake fluid on and work lever till it feels easy then work other end and put back together. ...

my shift cable is too tight how do i go about loosening it? i have a 02 neon 5 speed shift cable sounds like it is rusting and needs replaced.

...rusted through and that the parts above it have dropped into the frame. What is causing the shift to be hard to move? If you don't believe the shop take it to another one. If they tell you the same ...

My 2005 nissan altima shifter wont move up past reverse. it will shift into 1,2,3,d, and n then stop shifting. i cannot get it to park. Shift cable needs adjusting or replacement if rusted.

...shift cable stuck in drive in a 2000 sebring cable is stuck in drive- will not move Locate the cable on the transmission and see if it is still attached to the shift linkage. If it is, see if you can ...

...shift back into park any suggestions lots of ways. rusted cable, and it slipped and is no longer adjusted right. this takes 2 persons, to see if the tranny lever actually moves to park. or its the ...

...SHIFT LINKAGE IS RUSTED UP OR broke http://www.motortrend.com/cars/1996/chrysler/sebring/recalls/index.html This is a list of the recalls there is one on there for that. Id call the dealership to get ...