1997 Chevrolet Lumina "door close" Questions

...close the door mechanism is stuck in the closed position and the door won't close Push in the door button. While pushing in the button, take a screwdriver and pry up on the door mechanism on ...

...LOCK button UNLOCK the locks. Now with one hand hold the OUTSIDE DOOR HANDLE IN THE OPEN POSITION, while at the same time FLIPPING OPEN THE LATCH. All Done . Now you can close the door. Hope this ...

rear passenger door won't stay closed how do you remove a rear passenger door that won't stay closed. right now i have the door bungee corded so it will stay closed.but it will sway open if i make a ...

...close my door the radio comes on even if the car is off. I can open the door and the radio turns off, but as soon as the door closes the radio comes back on. What is the problem? This is an obvious ...

latch on driver door is closed door will not latch closed Pull the door handle and with a screw driver pry the latch to open at the same time. while pulling the door handle to open, use a screwdriver ...

door to close. It can't close at all right now. I have tried deicer, WD-40, and using a screwdriver to push it open, but I don't want to force it too much. Does the door latch have a child safety lock

dome stays on after closing the door there is a switch in the door latch need to remove door panel to get at. before you disassemble your door check dimmer switch is in off position

...door will not close.latch doesnt seem to want to keep door closed.need to know what the part is called.it looks like a little box lock assembly is this part(lock assembly) very expensive to fix or ...

door is loked on rear driver side want open can open rear driver side door Won't open from outside? Won't open from inside? Equipped with power door locks? IF so, and won't open inside/outside, ...

i need to remove and replace the drivers door You have to first remove the inner panel so you can unplug all the electrical connections, and push the wire harness out the opening at front of door ...