1997 Chevrolet Lumina "crow foot wrench" Questions

how to chge P.S. press. hose, hydroboost to gear, 2000 GMC Safari How do you get to the bottom of hose where it connects to the gear? pry plastic sleeve out of the way and use a crows foot wrench

...crow's foot tubing wrench, or just a normal style wrench with a tubing wrench end. Those fittings are tight, an you have no options left if you damage the fitting. As far as what to use, it is always ...

...foot wrench 12" 3/8 extention N ratchet N 10mm socket. remove the belt, use crows foot to remove the pressure line, remove other tubes, remove 4 10mm bolts and pluck the pump out, go to autozone or ...

Crow-foot tubing wrenches... In my youth (50+ years ago) I purchased my first full set of Snap-On tubing wenches... and have never been sorry. Easy job... merely messy... you need a large catch pan to

...to know how to take off. Can't get a wrench in to loosen lines. Have proper wrench but can't get into space to loosen. Is there another way to attack and loosen. use a 17 crow foot with an ...

...located on the qashqi 1.5 ntec.is it easy to change Above the catalytic convertor and takes a specialty wrench or a crows-foot tubing wrench (so as NOT to damage the top/wires). Carnac the ...

power steering hose easiest way to get the hose off Crows foot wrench or slotted combination wrench for hydraulic hoses.

...depending on which O2 sensor you are replacing, upstream or downstream. There are sensor sockets available or a metric wrench. Also available is a crow foot wrench that can be used with a

...I removed the starter but the space is very limited and the angle for removal is almost impossible it's like I need a distributor wrench. Any suggestions. Thanks. you mite need a crows foot

...be a special tool that I need to be using... there is a variety of special tools out there swivalls extensions crows foot. a crows foot is a end wrench head that conects to your wratchet.try