...305 in it and just had a 350 vortec put in and they didn't change or reprogram the pcm can I just use a used pcm that is from a 350 vortec with the same vin and not have to reprogram it? It's running ...
...305 a misfire in # 2 cylinder i changed the plug,wires distributor cap and rotor and coil hi there, if you can feel the misfire at an idle but not at a higher rpm than the fuel pressure regulator is ...
Question about Chevrolet 1500
...305 vortec silverado cuts out at constant speed over 40mph and warmed up. also wipers and power windows still work after key is out and door open 3 things you need to do is replace the Ignition ...
...vortec 305 5 spd have intermittent high idle and i have changed tps, maf, plugs wires dist caop n rotor cked for vac leaks cant figure it out anyone gotta idea? your problems might be internal with ...
...vortec 305 and it idles high and when i put it into gear it tries to run away and it clunks when in gear i think its an intake gasket because i pulled my pcv and there was high vacum pressure under ...
...vortec 5.0 lts 305 8 cilinders and it turns on and it runs but if I whan to accelerate more when runing it lows and if i push the accelerator more it turns off I have changed the fuel bunb, filter, ...
305 vortec engine and has no fire need to know where to start, how to check crank sensor, or what else i need to check if it died all of a sudden no warning, replace the ingition moduel located in the
...305 Vortec. The engine sounds great mechanically, no ticks, no knocks, no rattles. Seems tight. The problem is simply no power. It seems to hesitate, especially under a load. The truck has 212k miles ...
...vortec 305 they leak often as the gasket fails the replacement from felpro hasn't ever failed for me. The job is that the bolts out and put them back in. things to be careful abut are drain the ...
1,105 questions posted
Usually answered in minutes!
878 Questions
795 Questions
575 Questions
561 Questions
414 Questions