1994 Chevrolet S-10 "engine belt" Questions

serpentine belt diagram for a 4.3 engine serpentine belt diagram for a 4.3 engine if you buy your belt from Autozone the belt routing is on the package

...belt and make sure it is on all the pulleys. Start the engine and make sure it is rotating correctly. It would be a good idea to remove the negative battery connection so there is little chance to ...

...belt, then check for proper alignment and tension. Connect the negative battery cable. Fig. : Alternator mounting-4.3L engine REMOVAL & INSTALLATION (Except 2.2L Engine) Disconnect the negative ...

...ENGINE DOEN NOT HAVE A TIMING BELT IT IS A CHAIN.REMOVE THE DISTRIBUTOR CAP AND SEE IF THE ROTOR IS TURNING WHEN THE ENGINE IS CRANKED OVER.IF NOT THE CHAIN OR DISTRIBUTOR GEAR COULD BE BROKEN.HAVE U ...

...belt and check the pulleys on the front of the engine. There may be a bad idler pulley or other component. Replace the serpentine belt if it hasn't been done in a few years. While you're looking up ...

...belt 5 days ago. I bought this truck from a friend. The whole engine was rebuilt. I also did notice that the engine light also comes on. Iam not sure if this is part of the problem or something new. ...

...engine timing. OR.... Timing belt/chain has jumped and ALL the plugs are firing out of order! Dont wait on this one! Your engine could be destroyed if the timing belt jumps further or breaks! Some ...

...engine How to take pressure off the serprntine belt REMOVE OR DISCONNECT Use a 1/2 inch breaker bar with a socket placed on the tensioner pulley axis bolt and rotate the tensioner to the left ...

...engine belt for no A/C 99 s10 4.3W You can replace the belt with a shorter belt. Tell your local parts guy, that you have your truck and need a belt, but without A/C. That should get you going again. ...

...belt adjuster changed. Also run a bottle of injector cleaner through your system. SOUND LIKE ENGINE GETTING TOO HOT.THAT WILL CAUSE LOST OF POWER.CHECK COOLING CLUTCH FAN IF IT HAS RESISTANCE WHEN ...