1994 Chevrolet S-10 "car back fire" Questions

just did a tune up have wire off on firing order for a 93 S10 4.3 truck back fires need plug to distributor cap one or two wires are in wrong order The firing order is 1-6-5-4-3-2. . Rotor in dist. ...

...to trace back the source of fire, until you find the bad component. If you get fire at the plug, then the problem is in the fueling system. Try some starter fluid to see if its a fuel problem ...

i need diagram for firing order on a 91 s10 blazer 4.3 2wd For the 1991 Chevrolet S10 Blazer 4.3 V6, Both: 2WD AND 4WD: Firing Order: 1-6-5-4-3-2 Cylinders: .......(back)....... |..6..|.......|..5..|

diagram for the firing order on a 4.3 vortex chevy 4x4 s-10 blazer For the 1993 Chevrolet S10 Blazer 4.3 V6, Both: 2WD AND 4WD: Firing Order: 1-6-5-4-3-2 Cylinders: .......(back)....... |..6..|.......

fire. Firing order is 1 2 3 4 5 6. Easy enough. Wtf? It would be easy enough if that was the firing order but it isn't. The firing order is1-6-5-4-3-2. The odd numbers are on the driver's side

where can i find a chevy 28 v6 firing order diagram" http://wiki.answers.com/Q/What_is_the_firing_order_for_a_Chevy_S-10_2.8L_V6 For the 1984 Chevrolet S10 2.8L V6 (Same for the T10) Firing Order: 1 -

cap and rotor problems ran fine went to do tune up with new cap and rotor and wires. went to start now wont turn over please help you should check firing order because sounds like your wires are not ...

Firing order for 1998 s10 2.2l with coil packs The firing is 1 3 4 2. From the front of engine to the back, the cylinders are numbered 1 2 3 4. Cylinders 1 and 4 are on the same coil pack. Cylinders 2

was replacing my distributor on my chevy S10 pick-up 2.5 ingion.but forgot the firing order when putting back now truck wont start. can somebody show me step by step on how to set the firing order ...