1993 Chevrolet Cavalier "replace ac clutch" Questions

...ac stopped working and I was going to replace with a bypass pulley to skip the ac which I can live without. I have been reading where I might be able to skip the bypass pulley and just disconnect the ...

would not come back on , so i replaced the ac clutch in the comp and still will not come on .2.4 eng A mechanic would check to see if the system is full of freon, then check for power to the ac clutch

...AC now works, then replace the relay. If not , then verify compressor operation. With the engine running, watch the compressor clutch while someone else turns on the AC control. The clutch should ...

...AC clutch if the compressor was shot was a good idea. The pulley should spin freely on its bearing without any problems. Replacing the AC clutch can be done but there are a lot of parts and stages to ...

...ac clutch and taking out the pully What special tools are needed to replace the A/C clutch, pully and bearing pack on a 2000 Cavalier 2.2L? There is a special puller to remove the a/c clutch hub it ...

replace the compressor as a unit which would lose the Freon or R2 or whatever the new stuff is called now... Hope that helps. East Coast Canada Rocks!! :) Depends on where the noise is coming from. It

...clutch on 2004 CAVALIER. the car ran fine then started to feel like it was going to stall, its a manual not automatic. then one day it just shut off, if you turn the key there is nothing. i have ...

...ac from in the cab. Why would it not come on its own? it never overheats. i guess the thermostat opens and thats when it drops down . it seems to open when the guage is halfway up. then drops a 1/4 ...

...ac system? How would I know if it was the compressor? It isn't making any knocking noises. I know this is long, I just want whoever can answer this for me to know what I have tried. Thank you ...

replace the O-rings. ALL O-rings should be replaced at once if that is the case. Look to see where the red dye showed up if you put in the stop leak. Normally the seal in the compressor is what starts