1993 Chevrolet Cavalier "buick lesabre ignition coil pack" Questions

buick lasabre, no power to one of the ignition coil packs You have 3 individaul coils each one sits on the ICM(ignition control module). Now if there is no power to one of the ignition coil pack youll

...Buick LeSabre 3.8L V6: Firing Order: 1-6-5-4-3-2 Cylinders: .......(back) 2........4........6 1........3........5 .......(front) Ignition Coil Connections: ........(back) ......._____ ...

...Lesabre 3.8 no rpm signal and has code 42 ,questio is where is ign control module located IGNITION MODULE IS UNDER THE SPARK PLUG COILS. The ignition control module, should be attached by the coil ...

...Buick LeSabre 1992 Buick LeSabre 3.8 liter V-6 VIN "L" Identifying Ignition Types I and II On Type I coil packs, three twin tower ignition coils are combined into a single coil pack unit. On Type II ...

buick lesabre 3.8, engine misfires. coil for #1& #4 98 buick lesabre 3.8, engine misfires. coil for #1 and 4 cylinders does not have any spark. engine dionostic read out says misfire nothing else.

...Buick Lesabre How do you test the coil packs? I asked earlier if you could set the timing on a Buick Lesabre 1998, and I was told no, because eack one has a coil pack and if one is bad it could ...

2005 buick lesabre no spark there is no spark at all not even at the coilo packs it has new coil packs and new ignition control module what could be causing it Battery and connection,wires,

...is not firing, have changed the coil pack and still doesnt work Pull off both wires to that coil and start the car, if don't see any sparks after replacing the coil, Replace the ignition

i have replaced coil pack and still dont have spark so i need to know where ignition control module is located on 1990 buick lesabre with 3.8 v-6 You probably need a crank sensor.

buick Lesabre 1999 - 3800 my 1 & 4 coil pack not firing why? My 2&5 - 3&6 coil packs are firing but not my 1&4 all new plugs, new coil pack engine light flashing, running rough and ...