1993 Chevrolet Cavalier "bleeding brakes pedal doesn 39" Questions

...brakes. Check your ABS Wheel speed sensors. If 1 or them is not working properly the whole system doesn't work properly. Also remove the tire and try to wiggle or move the hub assembly, if it ...

... then right front then left front. Maintain proper fluid level in master cylinder while bleeding. Brake pedal hieght comes from the rear brakes, as those are the longest brake lines in the system. ...

after new pads and bleeding lines, have your brake booster checked for proper operation, the big round thing just behind your brake master cylinder. it's vacuum operated, allowing for power brakes

pedal with your hand it doesn't matter if it goes straight to the floor if that happens pull it with your hand, repeat that as if you are bleeding it up, then disconnect the piping beneath the car

...to be pressed down to the floor Sounds like you have to bleed the brakes. Check that the brake fluid reservoir cap doesn't have a ripped or leaking gasket. I would recommend bleeding your

...brakes. Then you should open one of the bleeder screws. The brake pedal should fall to the floor and air and/or fluid sould come out.. Close the bleeder before your helper lets the brake pedal up. If ...

pedal goes all the way to the floor! I've bled them and changed the master cylinder and now it back to normal but in the process of bleeding them I found out my back breaks don't work,

Brakes will not bleed Everything new! pads,hubs rotors,lines,wheel cylinders,ann new master cylinder! Have tried bleeding from master cylinder with success! but can not get anything in lines? If you ...

...bleeding the brakes several times and still is not has new brake fluid has to be? I deeply appreciate your help me is very urgent thanks ...

...have them pump the pedal again. Repeat until all the air is out of the system. Keep an eye on the brake fluid reservoir so it doesn't run out, or you will end up having to bleed the whole