1992 Chevrolet Camaro "wire starter chevy 350" Questions

...Chevy 350 tuned port. I have drained the fuel tank, cleaned (sump) fuel tank and strainer, replaced fuel filter and pump. Replaced spark plugs and distributor cap. Verified plug wires on right, and ...

...starter solenoid. If the car runs during cranking most likely your issue is a loose wire or faulty ignition switch to test use a jumper wire to jump from battery positive to the positive post on the ...

...starter or something clicking but it wont turn over at all nothing. one of my friends said something about a grounding wire. cause he had a problem like it. it is a 350 LT-1 v8 but his is a ls not ...

...wire that the sensor attatchs/plugs in to? Please any help is greatly appreciated. Aloha, Candie Hi Candie, if you have air, fuel and spark it should run. Getting to the fuel side-"is fuel getting ...

...diagram for the outside top of a Chevy 350 engine ...

...wire on starter that goes to battery, nut came off easy,put new wire on started tighting nut back on and whole stud is spinning,starter is still on truck 1978 chevy 350 v8 c10, starter stud spins the ...

...350 for 77 chevy impala the battery wire goes driectly on the large post of the starter along with all the wires that have fuse links on them the smaller wire goes on the small bolt on the

...starter wire i get 11 volts when i hook back to starter and try and start the voltage drops to 4 volts and cant start, but if i jumper a wire to starter from battery it cranks and fires right up. why ...

...WIRE FROM THE STARTER IGNITION SWITCH. THE LARGER BATTERY CABLE WILL GO TO THE UPPER TERMINAL ON THE STARTER SOLENOID. THERE MAY BE AN ADDITIONAL BATTERY FEED WIRE TAKE OFF FROM THE STARTER BATTERY ...

...starter is good getting no power to engage it need a wireing diagram the 10gauge purple wire on the solenoid should be HOT when starting. could be ignition switch or neutral saftey switch. Could be a ...