1992 Chevrolet Camaro "chevy truck 350 ignition" Questions

...truck is a 1975 chevy c10 350 2bbl w/hei Before replace the balancer and timing. Check it. Put #1 cylinder on top dead center of the compression stroke. Pull the cap and see where the rotor button is ...

...Chevy Camaro RS 25 Anniversary 3.1L standard shift? My engine rotates but does not engage. I have fuel and there is spark at my ignition coil. Also the engine rotates extremely fast when I do try to ...

...350 chevy. What TDC marks are used if i use Zoom timing chain whith 3 key way and i use 4 degrees adv. I want TDC with the 4 degrees at crank. I know i put both dots at each other or line up dots. ...

...chevy camro 305 tbi car surges when running and stalls we have replaced egr valve sparkplugs distributor, coil ,rotor and cap fuelfilter there appears to be no vacum leaks what about test the fuel ...

...chevy truck. the old engine and generator were swapped out with a 1983 350 V8 and 12 vlt alternator. The new electronic ignition module was burned out by the mechanic during installation. the second ...

i need wiring diagram for ecm ignition on 1989 chevy k2500 4x4 5l/350 1989 k2500 5.7l/350 What are you trying to do? Older ECM's are pretty rugged.

chevy truck wont start/hard to start 89 chevy k2500 tbi 350 auto 4x4. Truck is hard to start or wont start at all. Has high rpm miss/cut-out. Occasionally hesitates off idle. Will start up if you give

...350 chevy c10 and use it in a 1983 chevy 350 block Not impossible, but bad idea. The old distributors used coils that maxed out at about 12k volts. The distributors after about 1975 were electronic ...

...350 vortec motor 98 in my 98 chevy z71 4x4 pickup i have no spark and a cod p1361. new relutor cranks sensor and still no spark whats the problem PO 1361 ignition control circuit low voltage. Check ...

ihave 1990 chevy silverado 1500 350 mototor i have no spark i put on new coil and new ignition coil rotor cap change the ignition module in the distributor.