1991 Chevrolet Camaro "head" Questions

I need to take the heads off my camaro. How do I get the heads out after getting the valve covers off? I am having trouble getting the heads loose because the AC pulley refuses to come off. If I can ...

i need torque settings for the engine ie head bolts v6 engine 1 i need torque settings for the engine ie head bolts etc i am replacing the heads on a GMC 350 cu in engine.  what is the final ...

which is the hole for coolant temp sensor on my 87 camaro 2.8v some knuckle head replaced the temp sensor for the gauge on my 87 camaro with a bolt but there are two there so which one is which one is

my 1993 camaro is overheating could i have warped heads? my camaro is overheating. the mechanic says i have warped heads that he can smell it. is that even possible? if so is there a solution? There ...

I need to know the torque specs for the head gasket for a 96 3.8 chevy camaro Tighten the cylinder head bolts to 50 N·m (37 lb ft) in sequence. Use a torque angle meter to rotate each cylinder ...

...He said it looks like a gasket, and it is a hugh job to fix. What should I do? It sounds like a head gasket.Do you overheat? Boil Over? If you do it is the head gasket.It is a big expensive ...

is leaking coolant into the oil. I checked my oil and it is milky colored. how do I know if it is a head gasket or a cracked head or block If you take your radiator cap off when your car is cool, then

...freeze but I can't see where it goed check the gasket it probaely going back in to the cylinder head Make sure that the coolant recovery is at the correct marks, start the engine, let it warm to ...

...engine is running? No leaks in engine compartment Chevy 350, high comp, Camle hump/mickey mouse heads. Engine mounted in 1967 Firebird Engine is made before 86, but I'm not sure when? Regards ...

head gasket location The head gasket location is under the cylinder head to get to it the intake manifold has to be removed,then the valve cover there the cylinder head comnes out, you have two ...