1989 Chevrolet Suburban "fan motor works" Questions

Ad

Question about Chevrolet Suburban

1 Answer

motor working intermintantly. I've had the fan tested and it's fine. Could there be a vacum hose problem? The vacuum hose operates the mode selector not the fan. If you lost vacuum you would have only

Ad

...MOTOR. IF THE FAN WORKS ON ALL SPEEDS EVEN INTERMITTENTLY. THEN THE BLOWER RESISTOR IS OK WICH CONTROLLS THE VOLTAGE TO THE MOTOR TO GET THE DIFFERENT SPEEDS. WHEN THE RESISTOR BURNS OUT THE FAN JUST ...

Ad

fan not working from switch All fuses are good I jumped wire at blower and blower is working Heater blower motor resister is bad, replace, located under dash above heater motor. check relay and blower

...motor. You'll have to take it out and get a new one. Use a test light to see if there is power at the motor when the key is on and the fan switch is on. If power is present, then your motor is

Question about Chevrolet Suburban

1 Answer

rear fan switches work. Help please it could and could not be the switch. You also have a fan blower relay and a fan blower resistor that may be bad alone with the fan blower motor itself. Good Luck!!

...the fan off the subarbun blower onto the astro motor ? All I can say is try it. The worst-case scenario is that it won't work, in which case, you needed a blower motor for your Suburban to begin

...fan that need checked? When a blower motor does not turn on in low or med. and only turns on high its usally a resistor block. If nothing works it is most likely the bolwer motor itself or a fuse. ...

Question about Chevrolet Suburban

1 Answer

...it blows if the wire gets real hot you need to change the heater blower motor. You will probably need to change the heater fan motor resistor. follow the heater fan wire and it will go to the ...

changed the blower motor on 94 suburban blower motor works but no heat when i took off the old motor the fan fell off the motor I'm not sure what your problem is...

Question about Chevrolet Suburban

1 Answer

fan motor out and tested voltage. Here's what I saw which, to me, is strange. There are four ''knotches'' on the rotary switch corresponding to fan speed ... right? Defined in the schematic as Lo, M1,

Not finding what you are looking for?
Cars & Trucks Logo

174 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...