1994 Chevrolet K1500 "oil pressure switch location" Questions

Ad

...oil pressure sending unit located For 1989 Chevrolet Truck K1500 1/2ton P/U 4WD 4.3L TBI 6cyl the Oil Pressure Switch is located under hood, center, upper engine area, above transmission bellhousing ...

Ad

Question about Chevrolet 1500

1 Answer

...oil pressure switch has the fuel circuit to it so possible oil pressure switch also. fuel pump has a check valve to keep fuel from going back to tank, so when u turn key on fuel pressure should go up ...

Ad

where is the oil pressure guage sending switch located on93 Z71 350 motor? It should be center rear of block, by the distributor.

where is the oil pressure switch located on my vehicle beside the distirbutor 

oil pressure sending unit .So even if the relay burned out say on the highway the oil pressure unit would still supply voltage to the pump .And if the relay wore bad it would still start it would just

...pressure switch so i can jumper the plug just to see if i have no refig, You can jump the A/C clutch fan right on the compressor, be careful though. Lack of oil in the system will cost you a new A/C ...

...oil pressure guage in the cluster all worked the rest did not. I found a replacement at a local scrap yard. now the temp volt and oil pressure still work . was able to fix the shift indactor as it is ...

Question about Chevrolet 1500

1 Answer

oil pressure switch and its wiring. Repair as necessary and repeat the test. Also see figure 4 which is digram 3 from this link, this is the schematic on the fuel pump, the fuel pump's hot wire is tan

Not finding what you are looking for?
Cars & Trucks Logo

789 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29492 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...