1994 Chevrolet C/K 3500 "fuel filter" Questions

...fuel filter, still low pressure= fuel pump. The cheap carport mechanic method would be to change filters first, if the have been changed recently, move toward replacing the Fuel Pump. (some pump are ...

fuel filter may be clogged. If it has a rough idle, you could have a vacuum leak. You need to check all your hoses and check for a leak. Make sure your air filter is no clogged as well. If the problem

...fuel filter am getting fuel will not start even on starting fluid Check your lift pump. It is on the framerail. If that is not working check your oil pressure sensor it is behind the fuel filter. The ...

...fuel filter and added a water prevenative to fuel. Improved but still is bad at higher speed. Is there a water drain somewere?? Check your fuel filter they have water seperators built in and a drain ...

...fuel filter out and blew air through it and it seems open. After I blew air through it and put it back on and the filter is not filling up with gas. I checked the fuel fuse and it is ok. Not sure if ...

fuel filter what should i do? How did it run before you bought it? You did take your friend and check it out? Check the fuel pressure first and then any pressure regulator,on to fuel filter ,if things

then start then die YOU COULD HAVE A RESTRICTED AIR FILTER OR FUEL LINE OR FILTER.YOU COULD HAVE DEFECTIVE FUEL SUPPLY PUMP OR DEFECTIVE INJECTION PUMP.YOUR IDLE SPEED TOO LOW OR FAST IDLE INOPERATIVE

...properly, if not, check the filter, and the fuel lines to the tank!!! check your fuel lines from the tank no power put in new batter and still no power to start been sitting for one year help me ...

...on a 2001 chevy 1ton. Have changed all filters and fluid. Really bad when pulling a load. Have you checked fuel filter and air filter? Also check for loose or leaking air filter ducting to

...fuel filter or gas lines to check please advise. rd. you will see a 1/4 inch line goint to the front of the carb, that is the fuel line, you will nee a 5/8 line wrench and a 1 1/8 wrench to hold the ...