1995 Buick LeSabre "wireing 3 speed fan switch" Questions

Ad

Question about Buick LeSabre

1 Answer

...3 in the right underhood fuse block. There also could have been failure of the heater and A/C control assembly, the blower speed relay, the blower speed resistor, the high speed blower resistor, ...

Ad

...3. How do I "recalibrate" the actuators on an *electronically* controlled system? Many thanks in advance. First their is a blower motor resistor near the blower motor it controls and regulates the ...

Ad

have 4 post on switch and 3 post on resister dont no where to hook up blower wire The 3 resistor post should be the first 3 lower speeds on the switch. The high speed should be direct. Hope this helps

Question about Buick LeSabre

1 Answer

...3 conn. wires and only one speeed, you have to replace the motor. most types haves only one speed. extra speed fan motors where optional for extra heavy duty or high temps. if you have more questions ...

Question about Buick LeSabre

1 Answer

...3 ") often right under the glove compartment. I think that one of those coils of wire that is used for every speed selection but 5 is broken. High speed just connects straight positive power to the ...

...3 wire motor plug on the fan motor. power up the motor.brown is common,the red/black is the high speed and the red/white is the low speed.if the fan runs,then there is a short in the rest of the ...

...medium, 3 pull low, 4th pull lights only? don t matter but wired wrong ZE-208s6 and ZE-268s6 are the same. You can find it on this link: Zing Ear ZE 268s6 3 Speed Ceiling Fan Switch ...

Question about Buick LeSabre

2 Answers

speed, I would check the following; 1. Make sure the fuse isn't blown for the fan blower motor. 2. Check, or have checked the wires between the fan control switch and the fan blower motor. 3. Have the

...speed,not 1,2,or 3. the fan control balast (or speed controler) is burned out. by design if it only goes high, its junk. replace it and youll have it fixed. should be by the fan under the dash on the ...

...3. connect the jumper wire with fuse to the power terminal of the fan motor. 4. If the fan runs the switch is bad and needs to be replaced. 5. If the motor doesn't run the motor is bad and must be ...

Not finding what you are looking for?
1995 Buick LeSabre Logo

1,514 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

1998 Buick LeSabre
1998 Buick LeSabre

897 Questions

1992 Buick LeSabre
1992 Buick LeSabre

779 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...