1990 Buick LeSabre "signal light" Questions

signal light problem My signal lights won't work on my 1993 Buick LeSabre. Which fuse do I change to fix the signal lights. If the signal lights don't work on either side, front and back, check the ...

why my emergency flashers work and my signal lights don't the hazard lights use a different flasher(relay)then the signal lights.you don`t say if the signals work on one side or not,you should check ...

...signal flash fast no back turns at all? no brake lights only running lights and head lights were do I look to fix and replace Light out at the rear, wherever a light flashes faster than usual, it ...

No turn signals Have a 1990 Buick Lesabre. No turn signals, but I do have hazard lights. Just had the signal switched replaced as well as the fuse, and still no signals. When the signal switch is ...

signal light on, the flashers come on, but it doesn't do it all the time, only some of the time. This never happens when signalling left, just right. The signal will work normally for a while and then

signal and tail light does not come on when lights or on but when the brake is applied or right signal is on they work i changed all the bulbs and i now i dont know the problem Since this is happening

...signal indicator light inside the car stays on, when i put on the turn signal it runs rapidly and there is a beeping sound, also i get a question on the panel that says "turn signal still on?". i do ...

light up i pulled the four ways on and ck all the turn signal lights and they operate in hazard mode i found the 4 way flasher and that clicks in hazard mode i bought a new turn signal switch and that

blink. Will blink if i turn on hazard lights but will not if i just use turn signal. light comes on but does not blink. Changed bulb and fuse, did not help have you tried testing/replacing the flasher

...signal work. i have replaced the bulbs and still nothing. at night my tail light are on but neither brake light or turning signals works, WHAT CAN IT BE????? Are you sure you installed the correct ...