replace th fuel pump. ive been having problems with the car stalling out sputering and it smelled alot like gas I would test the fuel pump pressure with a gauge to see that it is bad first. Then check
cranks for about 10 seconds then starts other times starts instantly changeg balancer and crank sensor still same Replace the fuel filter and check the fuel pressure. If it is under 38 replace pump
...fuel pump was recently replaced and I can hear it after trying to start it. I am thinking fuel filter. Am I on the right track? could be allot of things fuel filter would not hurt to change but not ...
Fuel pump checks out fine. Fuel delivery to rail is strong. But there is no spark. Replaced the crank position sensor but problem still persists. Any other possibilities? I need help on this one guys.
1988 blazer turning over but not hitting 4.3 s10size I've replaced a bunch of fuel pumps and ignition control modules on these style blazers, take the air cleaner off and look at the injector to ...
...fuel pump crankshaft position sensor Check the ECM for this number on it. 1228253 these ecms are junk. These would do that cutting off and restarting. They also made the car speed up to about 30mph ...
...replace the fuel pump The fuel lines are located above the tank, if you lower the tank not to the ground but enough to get at you can tilt the gas tank so that you can unplug the lines and the wires. ...
how do i test a 1988 buick lesabre cranshaft sensor? no spark condition, fuel pump is working. only way is to see if you have power coming to sensor..no other way to check it..just replace
88 Buick Lesabre stalls Already had the fuel pump replaced. Still stalls. change the fuel pump relay.
...and to replace it u must remove the fuel tank from the car. you might need to change the fuel pump... or if their is a sensor...you may need to change that on first then see if it works... good
531 questions posted
Usually answered in minutes!
1,731 Questions
1,603 Questions
1,084 Questions
904 Questions
897 Questions