1988 Volkswagen Cabriolet "cv joint apart driving" Questions

...CV joint after you properly support the flange hub. If not, you need the type of puller with a yoke that accepts the wheel bolts to attach it to the hub. Then you can apply enough force safely. The ...

...cv joint Has no front drive shaft. Can I safely remove front axles and continue to drive? Delivery driver for chevy dealership. Yes you can, If you have taken the front drive shaft off, you can even ...

...cv joint that is stuck in the transmission on a 2005 Chevy Equinox all wheel drive.It cv joint split apart when I tried to remove it You need to get two small pry bars that will get behind the CV ...

...CV joints are not safe to drive. The joint could fall apart and/or lock up maybe causing a wreck. The joints are on the drive axles. It could even damage the transmission. I highly recommend to ...

...CV joint from the drive shaft. How do you suggest i do it? Yes you can remove the drive shaft by unbolting the bottom ball joint,then removing the nut that holds the shaft in the hub I would'nt ...

...apart The CV-boot has C-clips inside the boot they must be released befor the boot will come apart. It would be very hard to tell you how to do it on this page. You really need a repair manual on how ...

...joint. It's probably $500 to replace the CV joints, maybe more on a Volvo. The good thing is, the sound will get much, MUCH worse before it actually falls apart and leaves you stranded. So you have ...

...simulate problem with accelarator or brake. car running perfectly apart from this issue probably a bad cv joint or "U" joint and the problem is a harmonic vibration caused by the loose / worn ...

...cv joint. Tie rods will not normally clunck constantly. Both can break - a cv joint is not dangerous, but a tie rod breaking is. Worth having a shop check it out. No but I will advice you do a ...

...CV joint troubles i was driving my 89 honda accord when i hit a speed bump and heard something fall off. i rolled up to the stop light (its a stick shift and i had it in neutral) and when i tried to ...